Mozila firefox 15

mozilla update versi terbaru lagi nih,,,
lebih keren dan mantappp,,





Download Mozilla firefox 15

Ebook tutorial HTML

ini ebook tutorial tentang HTML dan pasti cepat untuk bisa,,

download ebook tutorial HTML

Chapter 11

Cisco CCNA1-Chapter-11  Correct Questions Answers 100%

1. Users in the network are experiencing slow response time when doing file transfers to a remote server. What command could be issued to determine if the router has experienced any input or output errors?

• show running-config;
• show startup-config;
• show interfaces ;
• show ip route;
• show version;
• show memory.

2.


  Refer to the exhibit. A technician applies the configuration in the exhibit to a clean router. To verify the configuration, the technician issues the show running-config command in the CLI session with the router. What lines should the technician expect to see in the router output from the show   running-config command?

• enable password class

          line console 0
          password ccna;

• enable secret cisco

          enable password class
          line console 0
          password ccna;

• enable secret 5 $1$v0/3$QyQWmJyT7zCa/yaBRasJm0enable

          password class
          line console  0
          password ccna;

• enable secret ciscoenable password 7 14141E0A1F17

          line console 0
           password 7 020507550A;

• enable secret 5 $1$v0/3$QyQWmJyT7zCa/yaBRasJm0enable

          password 7 14141E0A1F17
          line console 0
          password 7 020507550A ;

3.



 Refer to the exhibit. A network administrator on HostA has problems accessing the FTP server. Layer three connectivity testing was successful from HostA to the S1 interface of
RouterB. Which set of commands will allow the network administrator to telnet to RouterB and run debug commands?

• RouterB(config)# enable secret class

          RouterB(config)# line vty 0 4
          RouterB(config-if)# login

• RouterB(config)# enable secret class

          RouterB(config)# line vty 0 2
          RouterB(config-vty)# password cisco
          RouterB(config-vty)# login

• RouterB(config)# enable secret class

          RouterB(config)# line vty 0
          RouterB(config-line)# password cisco
          RouterB(config-line)# login

• RouterB(config)# enable secret class

          RouterB(config)# line aux 0
          RouterB(config-line)# password cisco
          RouterB(config-line)# login

• RouterB(config)# enable secret class

          RouterB(config)# line aux 0
          RouterB(config-vty)# password cisco
          RouterB(config-vty)# login

4.



 Refer to the exhibit. The output is shown for the show ip route command executed on Router A. What does the IP address 192.168.2.2 represent?

• Gateway for the 192.168.1.0 network;
• Gateway for the 192.168.3.0 network;
• IP assigned to the serial port on Router A;
• IP assigned to the serial port on Router B.

5. What command is used to change the default router name to Fontana?

• Router# name Fontana;
• Router# hostname Fontana;
• Router(config)# name Fontana;
• Router(config)# hostname Fontana.

6.  


 The serial connection shown in the graphic needs to be configured. Which configuration commands must be made on the Sydney router to establish connectivity with the Melbourne site? (Choose three.)

• Sydney(config-if)# ip address 201.100.53.2 255.255.255.0 ;
• Sydney(config-if)# no shutdown ;
• Sydney(config-if)# ip address 201.100.53.1 255.255.255.224 ;
• Sydney(config-if)# clock rate 56000 ;
• Sydney(config-if)# ip host Melbourne 201.100.53.2 .

7. 










 Refer to the exhibit. What additional command is required to allow remote access to this switch?

• NA-SW1(config-if)# no shutdown;
• NA-SW1(config)# enable password password;
• NA-SW1(config)# ip default-gateway address ;
• NA-SW1(config-if)# description description .

8. When network services fail, which port is most often used to access a router for management purposes?

• AUX;
• Ethernet;
• Console ;
• Telnet ;
• SSH .

9. A network administrator needs to keep the user ID, password, and session contents private when establishing remote CLI connectivity with a router to manage it. Which access method should be chosen?

• Telnet;
• Console;
• AUX;
• SSH.

10. In a Cisco router, when do changes made to the running-configuration take effect?

• after a system restart;
• as the commands are entered ;
• when logging off the system;
• when the configuration is saved to the startup-configuration;

11. 

Refer to the exhibit. Which names correctly identify the CLI mode represented by the prompt for Switch-East4#? (Choose two.)

• line configuration mode;
• user executive mode;
• global configuration mode;
• privileged executive mode ;
• interface configuration mode ;
• enable mode .

12. Which three terms correctly define the forms of help available within the Cisco IOS? (Choose three.)

• hot keys ;
• context-check ;
• context-sensitive ;
• structured check ;
• command override ;
• command syntax check .

13. Which combination of keys would be used at the CLI prompt to interrupt a ping or traceroute
process?

• Ctrl-C;
• Ctrl-P;
• Ctrl-R;
• Ctrl-Shift-6 ;
• Ctrl-Z .

14. 


Refer to the exhibit. What command will place the router into the correct mode to configure an appropriate interface to connect to a LAN?

• UBAMA# configure terminal;
• UBAMA(config)# line vty 0 4 ;
• UBAMA(config)# line console 0;
• UBAMA(config)# interface Serial 0/0/0;
• UBAMA(config)# interface FastEthernet 0/1.

15. On a Cisco router, which interface would be used to make the initial configuration?
                                            
Console Port ---this

16.



 Refer to the exhibit. A student is responsible for the IP addressing, configuration and connectivity testing of the network shown in the graphic. A ping from host B to host C results in a destination unreachable but a ping from host B to host A was successful. What two reasons could account for this failure based on the graphic and partial router output for the Dallas router? (Choose two.)

• The host A is turned off;
• The Fa0/0 interface on Dallas is shutdown;
• The LAN cable is disconnected from host B;
• The S0/0/1 IP address of Dallas is improperly configured;
• The Fa0/0 interface on Dallas is in a different subnet than host B;
• The clock rate is missing on the serial link between Dallas and NYC.

17. In a CISCO device, where is the IOS file stored prior to system startup ?

• RAM;
• ROM;
• Flash;
• NVRAM.

18.  


 The connection between routers B and C has been successfully tested. However, after rebooting router C, the administrator noticed the response time between networks 10.10.3.0 and 10.10.4.0 is slower. Ping between the two routers is successful. A trace route indicates three hops from router B to router C. What else can be done to troubleshoot the problem?

• Ping router B S0/1 connection from router C;
• Trace the connection between router B to router C S0/1;
• Issue a show ip route command in router B to verify routing is enabled;
• Issue a show ip interface brief command on router C.

19. Immediately after a router completes its boot sequence, the network administrator wants to check the routers configuration. From privileged EXEC mode, which of the following commands can the administrator use for this purpose? (Choose two.)

• show flash ;
• show NVRAM ;
• show startup-config;
• show running-config;
• show version.

Mp3Gain Pro

waaahhhh software ane bgt nih..buat agan" yang senang dengeren musik,nih ane share software buat  gedein volume lagu" yang agan sukai,,
cara penggunaan nya jg gampang,,tinggal kita install lalu add file dan file musik yang kita pilih,setelah itu lalu klik aja klik analysis,dan setelah selesai klik trak again trus exit deh,,,gampang kanm,,,



Download Mp3 Again pro

Theme Angry Bird For WIindows 7

Nah sekarang ane mau share theme windows 7 yang keren dan unik,
tampilan dekstop yang mantap abis deh,,untuk sobat" yang berminnat nih ane kasih link downloadnya.


Download Theme Angry Bird For WIindows 7

K-Lite Codec 8.60 Full

Nah, sekarang ane mau share versi terbarunya, K-Lite Codec 8.60 Full. Sobat udah pada tau kan mengenai software ini? Apa perlu ane kasih tau lagi?? mmm.... Oke deh kalau gitu, mumpung ane lagi baik hati nh, jadi ane kasih tau lagi mengenai software K-Lite Codec Pack. hehe.... :D
K-Lite Codec Pack adalah software multimedia yang bisa memutar video dan juga lagu. Software ini juga sangat mudah lho tuk digunakan. Jadi buat para awam sangat disarankan untuk menggunakan software multimedia yang satu ini. Oke, bagi sobat yang menginginkan software multimedia ini, silahkan aja di download.

Download  K-Lite Codec 8.60 Full

Bandz Pro

Di malam yang cerah ini ane mau share software Alat musik di PC / Laptop, nama softwarenya Bandz Pro. Bandz Pro adalah software alat musik virtual. Terdapat 5 alat musik virtual yang tersedia, diantaranya piano
classic, organ, gitar akustik, gitar listrik dan drum set. Semua alat musik itu dapat sobat mainkan secara virtual dengan menggunakan software BandzPro yang dapat sobat download pada blog ini. Jadi bagi sobat yang tidak mempunyai alat musik diatas tidak perlu khawatir, sobat dapat memainkan alat-alat musik diatas secara virtual. Pertajam keahlian bermusik sobat dengan menggunakan BandzPro...
Langsung saja yah ane kasih Link Downloadnya.

 Download Bandz Pro

Hanso Player

Selamat malam sobat,,,. Malam ini ane mau share software pemutar musik. Software yang satu ini bisa menjadi alternatif gratis dan terbaik dalam mendengarkan berbagai file musik kesayangan Anda dengan

fitur dan fungsi yang beragam.
Hanso Player merupakan aplikasi audio player yang dikembangkan oleh Hanso untuk memberikan pengalaman yang lebih mengasikkan dan lebih baik dalam mendengarkan file audion musik kesayangan Anda. Fitur dan fungsi yang dimiliki oleh aplikasi gratisan ini tidak kalah berkualitas dengan para pesaingnya. Selain itu, Hanso Player mendukung berbagai format file audio populer, semacam MP3, MP4, MPC, FLAC, OGG, WAV, WMA, dan masih banyak lagi.
Bagi ysng berminat silahkan saja Download secara gratis hanya di World Technology.

Download Hanso Player

Aone Ultra Joiner 6.2

Selamat pagi sobat. sebelum ane pergi kuliah, ane mau share Multimedia yang ringan namun fungsinya sangat menarik. Nama software multimedia ini adalah Aone Ultra Joiner 6.2. Fungsi nya adalah menjoin beberapa lagu atau video kemudian menconvert menjadi exstensi yang sesuai dengan keinginan. Hasil join tersebut kemudian dapat di convert menjadi beberapa format seperti Avi,
MKV, MP3, MP4 dan juga bisa di convert ke tipe HP mobile dan BB. Oke, langsung aja deh, bagi sobat yang ingin software ini, silahkan aja di download.

Catatan : Saat Registrasi Disconnect dulu dari Internet.

 Download Aone Ultra Joiner 6.2

Chapter 02

1. A network administrator enters the following command into Router1: ip route 192.168.0.0 255.255.255.0 S0/1/0. Router1 then recives a packet that is destined for 192.168.0.22/24.

After finding the recently configured static route in the routing table, what does Router1 do next to process the packet?
Drops the packet because the destination host is not listed in the routing table;

• Looks up the MAC address of the S0/1/0 interface to determine the destination MAC address of the new frame;
• Performs a recursive lookup for the IP address of the S0/1/0 interface to determine the destination MAC address of the new frame;
• Performs a recursive lookup for the IP address of the S0/1/0 interface before forwarding the packet;
• Encapsulates the packet into a frame for the WAN fink and forwards the packet out S0/1/0 interface.

2.  Refer to the exhibit. Which set of commands will configure static routes that will allow the WinterPark and the Allamonte routers to deliver packets from each LAN and direct all
other traffic to the Internet?

• WinterPark(config)#ip route 0.0.0.0 0.0.0.0 192.168.146.1; Altamonte(config)#ip route 10.0.234.0 255.255.255.0 192.168.146.2 ;Altamonte(config)#ip route 0.0.0.0 0.0.0.0 s0/1 ;
• WinterPark(config)#ip route 0.0.0.0 0.0.0.0 192.168.146.1;Altamonte(config)#ip route 10.0.234.0 255.255.255.0 192.168.146.2 ;Altamonte(config)#ip route198.18.222.0 255.255.255.255 s0/1 ;
• WinterPark(config)#ip route 172.191.67.0 255.255.255.0 192.168.146.1 ;WinterPark(config)#ip route 0.0.0.0 0.0.0.0 192.168.146.1  ; Altamonte(config)#ip route 10.0.234.0 255.255.255.0 192.168.146.2 ;
• WinterPark(config)#ip route 172.191.67.0 255.255.255.0 192.168.146.1 ;Altamonte(config)#ip route 10.0.234.4 255.255.255.0 192.168.146.2 ; Altamonte(config)#ip route 0.0.0.0 0.0.0.0 s0/0.

3.   







Which of the following is true regarding CDP and the graphic shown?

• CDP running on Router D will gather information about routers A,B,C, and E;
• b. By default, Router A will receive CDP advertisments from routers B and C;
• c. If routers D and E are running different routing protocols, they will not change CDP information;
• d. Router E can use CDP to identify the IOS running on Router B.

4.

Refer to the exhibit. What two commands will change the next-hop address for the 10.0.0.0/8 network from 172.16.40.2 to
192.168.1.2 ? (Choose two)

• A(config)#no network 10.0.0.0 255.0.0.0 172.16.40.2;
• A(config)#no ip address 10.0.0.1 255.0.0.0 172.16.40.2;
• A(config)#no ip route 10.0.0.0 255.0.0.0 172.16.40.2;
• A(config)#ip route 10.0.0.0 255.0.0.0 s0/0;
• A(config)#ip route 10.0.0.0 255.0.0.0 192.168.1.2

5.









Refer to exhibit. Which static route should be configured on Router1 so that host A will be able to reach host B on the 172.16.0.0 network?

• ip route 192.168.0.0 172.16.0.0 255.255.0.0;
• b. ip route 172.16.0.0 255.255.0.0 192.168.0.1;
• c. ip route 172.16.0.0 255.255.0.0 S0/0/1;
• d. ip route 172.16.0.0 255.255.0.0 S0/0/0.

6. Which piece of information is available from examining the ouput of the command show ip interface brief ?

• Interface speed and duplex;
• Interface MTU;
• Errors;
• Interface MAC address;
• Interface IP address.

7. Which address can be used to summarize networks 172.16.0.0/24, 172.16.7.0/24  ?

• 172.16.0.0/21;
• 172.16.1.0/22;
• 172.16.0.0 255.255.255.248;
• 172.16.0.0 255.255.252.0

8. Hosts on two separate subnets cannot communicate. The network administrator suspects a missing route in one of the routing tables. Which three commands can be used to help
troubleshoot Layaer3 connectivity issues? (Choose three) .

• Ping;
• Show arp;
• Traceroute;
• Show ip route;
• Show controllers;
• Show cdp neighbor.

9.

Refer to the exhibit. Given the ouput in the exhibit, how would a clock rate be determined for this link?

• The rate would be negotiated by booth routers;
• A rate would not be selected due to the DCE/DTE connection mismatch;
• The rate configured on the DTE determines the clock rate;
• The rate configured on the DCE determines the clock rate.

10.

Refer to the exhibit. How will packets destined to the 172.16.0.0 network be forwarded?

• Router1 will perform recursive lookup and packet will exit S0/0;
• Router1 will perform recursive lookup and packet will exit S0/1;
• There is no matching interface associated with network 172.16.0.0 so packets will bedropped;
• There is no matching interface associated with network 172.16.0.0 so packets will take gateway of last resort and exit out S0/2.

11. A static route that points to the next hop IP will have what administrative distance and metric in the routing table?

• Administrativedistance of 0 and metric of 0;
• Administrative distance of 0 and metric of 1;
• Administrative distance of 1 and metric 0;
• Administrative distance of 1 and metric of 1.

12.











Refer to the exhibit. A company network engineer is assigned to establish connectivity between the two Ethernet networks so that hosts on the 10.1.1.0/24 subnet can contact hosts on the 10.1.2.0/24 subnet. The engineer has been told to use only static routing for these company routers. Which set of commands will establish connectivity between the two Ethernet networks?

• R1(config)# ip route 10.1.2.0 255.255.255.0 192.168.0.1 ; R2(config)# ip route 10.1.1.0 255.255.255.0 192.168.0.2 ;
• R1(config)# ip route 10.1.2.0 255.255.255.0 192.168.0.2 ; R2(config)# ip route 10.1.1.0 255.255.255.0 192.168.0.1;
• R1(config)# ip route 10.1.1.0 255.255.255.0 192.168.0.2 ;R2(config)# ip route 10.1.2.0 255.255.255.0 192.168.0.1 ;
• R1(config)# ip route 10.1.1.0  255.255.255.0 192.168.0.1 ; R2(config)# ip route 10.1.2.0  255.255.255.0 192.168.0.2 ;
• R1(config)# ip route 0.0.0.0  0.0.0.0  10.1.2.1 ; R2(config)# ip route 0.0.0.0  0.0.0.0  10.1.1.1.

13. Why is it advisable to enter a next-hop IP address when creating a static route whose exit  interface is an Ethernet network?

• Adding the next-hop address eliminates the need for the router to do any lookups in the routing table before forwarding a packet;
• In a multi-access network, the router cannot determine the next-hop MAC address for the Ethernet frame whitout a next-hop address;
• Using a next-hopaddress in a staticroute provides a route with a lower metric;
• In multi-access networks, using a next-hop address in a static route makes that route a candidate default route.

14. What happens to a static route entry in a routing table when the outgoing interface is not available?

• The route is removed from the table;
• The router polls neighbors for a replacent route;
• The route remains in the table because it was defined as static;
• The router redirects the static route to compensate for loss of the next hop device.

15.  Refer to the exhibit. What is the significance of the /8 in route to the 10.0.0.0 network?

• It indicates that there are 8 hops between this router and the 10.0.0.0 network;
• It represents the time, in miliseconds, it takes for a ping to reply when sent to the 10.0.0.0 network;
• It indicates that there 8 subnets in the destination network to wich the router can forward packets;
• It indicates the number of consecutive bits, from the left, in the destination IP address of a packet thet must match 10.0.0.0 to use that route.

16.











Which two statements describe functions or characteristics of CDP (choose two).

• It starts up automaticaly and allows the device to detect directly connected neighbor devices that use CDP;
• It operates at the network layer and allows two system to learn about each other;
• It creates a topology map of the entire network;
• It allows system to learn about each other even different network layer protocols are configured;
• It forwards advertisments about routes for faster convergence.

17. A router has one static route configured to each destination network. Which two scenarios would require an administrator to after the static routes that are configured on that router? (Choose two)

• The destination network no longer exists;
• The destination network is moved to a different interface on the same router;
• The path between the source and destination is upgraded with a higher bandwith link;
• The remote destination network interface has to be down for 15 minutes of maitenance;
• A topology change occurs where the existing next-hop address or exit interface is not accesible.

18.






Refer to the exhibit. What two commands are required to provide connectivity between the 192.168.1.0 and 10.0.0.0 networks whithout requiring
recursive lookup? (Choose two)

• A(config)#ip route 10.0.0.0 255.0.0.0 s0/1/0 ;
• A(config)#ip route 10.0.0.0 255.0.0.0 172.16.40.2 ;
• A(config)#ip route 10.0.0.0 255.0.0.0 s0/0/0  ;
• B(config)#ip route 192.168.1.0 255.255.255.0 s 0/0/0  ;
• B(config)#ip route 192.168.1.0 255.255.255.0 172.16.40.1 ;
• B(config)#ip route 192.168.1.0 255.255.255.0 s0/1/0 .

19. Which of the following are displayed by the Router# show cdp neighbors command? (Choose three)

• Load ;
• Platform ;
• Reliability ;
• Holdtime ;
• Local interface .

20. The ouput of the Router# show interfaces serial0/1 command displays the following:
          Serial0/1 is up, line protocol is down
What is the most likely cause for the line protocol being down?

•   Serial0/1 is shutdown;
• There is no cable connecting the routers;
• The remote router is using serial0/0;
• No clock rate has been set.

21. What two devices are responsible for converting the data from the WAN service provider
into a form acceptable by the router? (Choose two)

• the serial port of the router;
• a modem;
• a switch;
• the ethernet port of the router;
• a CSU/DSU device;
• a DTE device.